Introduction

Advanced three phase automatic relay test set. PC control through user friendly MPWIN Relay Test Software. High accuracy and high power over wide range. Suitable for IEC61850 GOOSE simulation, subscription and sampled value publishing. CE, FCC.

Hardware configuration

MP3000F: 6 x 30A, 4 X 125V, 0-265 V aux dc, 0-3 A high burden current output, 8 bin inputs, 4 Bin outputs. Suitable for IEC61850 GOOSE simulation, subscription and sampled value publishing.

MP3000FH: 6 x 30A, 4 X 300V, 0-265 V aux dc, 0-3 A high burden current output, 8 bin inputs, 4 Bin outputs. Suitable for IEC61850 GOOSE simulation, subscription and sampled value publishing.

Product Specifications

Current generators: 6 independent generators in two groups.

                                Each group is of 3 generators with common neutral.

Max current: 30 A ac- 20 A dc

Resolution: 0.03m A(0-0.3 A). 0.3m A (0.3-3.0 A). 1.0m A(3.0 -30A)

Accuracy: Error ≤ 0.1% of setting value. (I ≥ 0.2 A) error < 0.1% of setting value ± 200 µa. (I < 0.2 A)

Harmonic distortion: 0.2 A -30 A≤ 0.2%

Response time: ≤100µS

Power: 5A : 60 VA. 30 A : 300 VA max

Output time: Continuous (I ≤ 10 A). 100S (10 A < I≤20 A). > 20 S(20A<I ≤ 30A)

Voltage generators: 4 independent generators with common neutral.

                                4th voltage generator can be 3U0 or independent.

Max voltage AC: 125V L-N/ 250 V L-L (MP3000F). 300V L-N/600V L-L( MP3000FH)

Amplitude range of DC: ± 176 V(MP3000F) , ± 424 V ( MP3000FH)

Resolution: 4 mV(MP3000F),10 mV(MP3000FH)

Accuracy: Error ≤0.1% of setting from 10 V …125V(MP3000F).

Error ≤0.1% of setting from 24 V …300V( MP3000FH)

Harmonic distortion: ≤ 0.2%(10- 125 V..MP3000F) ≤ 0.2%(24- 300 V MP3000FH)

Response time: ≤100µS

Power: ≥ 40 VA (57V) . ≥100VA(100V- 300V)

Output time: Continuous

Frequency:

Range (sine wave): DC...1000Hz

Range (transient ): DC…3000Hz

Accuracy: 0.01%

Resolution: 0.001Hz

Phase angle:

Range: -360°…+360°

Accuracy: ≤0.2º

Resolution: 0.05º

Aux DC:

Range: 0-265 V Variable, Independently controlled

Power: 100 W max

High Burden Current Output:

Range:  0-3 AMP

Power: 100 VA

Max Voltage: 100 V

Max Binary Input: Can trigger by GPS

Numbers:8

Input sensing: Automatically detects the changeover of a dry or a wet contact

Sensing range: Wet contact( 24- 250V DC)

Resolution: 50 µS

Max. measuring time: Up to 99,999 S

Binary output:

Numbers:4

Type: Potential free

General specifications:

National standard: DL/T624-1997

AC Mains input voltage range: 110- 265 V

AC Mains voltage frequency: 45- 65 Hz

Operating temperature: -5 TO +50 ° C

Relative Humidity: 5-95% non condensing

Interface: Ethernet for PC connection, Optical for 61850

EMC: EN 61326-1 : 2006

          EN 61000-3-2 : 2006

          EN 61000-3-3: 1995 + A1: 2001+ A2:2005

         FCC Part 15 Class A

LVD: EN 61010-1:2001

Max Power Consumption: 2000VA at 230 V; 1000VA at 115 V

Standard accessories: Test lead set and connectors with a canvas carry bag. Shoulder carry bag for MP3000. Transportation case.

Optional features: Contact us before order

Analog inputs:One dc current: 0-20 mA , Resolution 2 µA , Accuracy : 0.05%

                          One DC voltage: ± 10 V, Resolution :1 mV, Accuracy: 0.05%

Integrated GPS: For end to end test